Temperature Controlled Conservation Water Bath Unit

A heated sink unit for paper conservation which has a recirculatory heat and pump system to provide a temperature controlled water bath around open dishes. A light grey rigid PVC unit supported on a stainless steel square section frame ,panelled in on the long sides and open on both ends to allow access to the drain valves. The Inner tank has a flange for fixing to the inner water bath cover so as not to float up on the water jacket. There is a platform for mounting taps within perimeter edge upstand. A choice of two temperature control units which meet with the high standards required by Health and Safety Regulations is available Pro-Co Temptronic PTT Controller for top plate mounting or HU1000 Thermocirculator with 2KW heater for fitting below the unit . A choice of distilled water, swivel or mixer swanneck taps are also available. Full specifications available on request.

Specifications

Temptronic P.T.T. Unit	HU1000 Thermocirculator
Scale Range: 15°C 50°C Stability: better than +/- 1°C Pump Capacity: 15 litres per minute Heater Power: 2kw Electrical Loading: 2.1kw 240v 50Hz	Working Temperature Range: Ambient to + 65°C Heater Rating: 500 Reservoir Capacity: 2.2 litres Pump type: Glandless, Magnetic Drive Pump Motor: Shaded Pole Pump Flow: 270 (zero head) lit/hr Pump Pressure: 0.25 kg/cm²; 3.5psi Max. Pump Head: 2.5 metre/7.5 feet (unrestricted) Size: 330 x 280 x 150 mm/13 x 11 x 6 inches Weight: 8 kg/17.6lb Electrical: Specify 220/240V 50Hz or 115V 60Hz

Code	Item	Price (£)
	Water Bath Unit Light Grey Rigid PVC supported on 30 x 30mm stainless steel section frame Panelled in on long sides, open on both ends for access to drain valves\| Inner Tank 2000 x 1000 x 300 320 mm deep, with flange for fixing down to inner water bath cover with stainless steel screws Platform for mounting taps within perimeter edge upstand External Size: 2330 x 1200 mm	£2632.00
	Temperature Control Options For mounting on top plate PTT 2000 controller with loose cover this has a flying lead to connect to mains plug £610.00 For mounting below unit H1000 with 2kw heater, connected with pipework through to water bath	£1640.00
	Tap Options Swanneck Tap for distilled water	£126.00
	Swanneck Swivel 85004AC	£74.00
	Swanneck Mixer Tap 85394KM	£146.00

Packing
Packing in wooden case with pallet base (optional) £90.00
Delivery packed or unpacked £ POA
All Prices Plus VAT

To enquire about this product click here to open an enquiry form in a new window.

Temperature Controlled Conservation Water Bath Unit

General Categories

New Developments