For laminated materials including ESCAL®, foil bags and general Polyethylene type products, we have the CRISS # CROSS™ Table Top Sealer (SEIWTT0610) with both welding jaws heated and fitted with 9.5mm wide elements. This sealer is ideal for layflat tube materials which can be fed from the rear of the machine. There are only two settings on the machine, one controls the weld time and the other the cooling time. Everything else is pre-programmed into the machine making it easy to use and consistent in operation. The CRISS # CROSS™ Table Top Sealer is supplied pre-drilled to accept two accessories which can be retrofitted after purchase by the customer. Optional tray attachment (SEIWFT0610), 254mm deep, which continues the length of the tabletop welder in front of the weld jaws. This tray has vertical adjustment slots which allow 25mm of vertical adjustment. Manual cutter assembly (SEIWCA0610) which fits behind the welding jaws and has a safety knife attached to the top jaw. As soon as the weld starts, the knife may be depressed and drawn across the material roll. This is very useful when using continuous material like the ESCAL® tubing. All fixtures and fittings are included in the price.